Schaltbox
Scope of delivery
EN
17
When the negative terminal of the battery is disconnected, all data stored in the volatile
memory will be lost.
z
The following data must be set again, depending on the vehicle equipment options:
– radio code
– vehicle clock
– timer
– on-board computer
– seat position
You can find instructions for making these settings in the appropriate operating
instructions.
Observe the following instructions when working with electrical parts:
z
When testing the voltage in electrical cables, only use a diode test lamp (fig.
1
1,
page 3) or a voltmeter (fig.
1
2, page 3).
Test lamps with an illuminant (fig.
1
3, page 3) consume voltages which are too
high and can damage the vehicle's electronic system.
z
When making electrical connections, ensure that
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp edged ducts without protection (fig.
2
, page 3).
z
Insulate all connections.
z
Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
3
Scope of delivery
No. in
fig.
3
, page 4
Quantity Description
Item number
1
1
control box
RV-SWITCH-SV
2
1
connection cable for vehicle electrics
3
1
Three-stage switch for activating the
camera manually
4
1
Two-stage switch for activating
manual operation
5
1
connecting cables for control box –
monitor
RV-502-M/M
–
1
installation material
_RV-SWITCH-SV.book Seite 17 Montag, 24. Oktober 2011 8:34 20
