Domburg ASB4, Руководство пользователя

Страница: 4 / 14

ASB4 manual │ version 1 - 2022
Page:
3 from 14
Introduction
Thank you for purchasing the ASB4 Analogue Servo Controller. This article was developed especially for
users who would like to control their turnouts and barriers beautifully and reliably by hand. A controller
which is unique in its kind and which offers an answer to a much requested need. There are many users
for whom digital control is still a bridge too far, or who simply do not find digital control of accessories
interesting. This group of users controls their turnouts and scenery manually with switches on a control
panel. A method known to every model railway user. These users often use magnetic controls for points,
signals and barriers. A solution that has many disadvantages compared to servo control.
Servo control is not only cheaper to buy, but also much more economical, reliable and beautiful than the
click-clack magnets. However, for servo control you usually need a hardware device with software to control
the servos. There are some solutions for this via a handful of suppliers of small PCBs. However, these
solutions lack the possibility to switch a relay with a servo. These relays have two switch contacts, which
makes it possible to polarize hearts and create feedback for the position of the switch.
The ASB4 is the successor of the very successful ASB. Where the ASB was limited to control 2 servos in
turn, the ASB4 is developed for 4 servos which can be controlled simultaneously. Also the way of
programming is improved and simplified. Where with the ASB you still had to go through all the menus,
with the ASB4 you can choose to program each servo individually.
I wish you a lot of pleasure with the ASB4, should you have any suggestions for improvement of the
product or a critical note. Please let me know by sending an email to
info@domburgtrainsupport.nl.
Kind regards,