Doman PEGASO, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 17

14
•
Turn off the main switch 1 and unplug the machine from the socket on the electrical
panel.
•
Shake the machine well as if rinsing the boiler.
•
Lift the machine and place a container below to collect the dirty water from the boiler.
•
With a n° 22 spanner, partially unscrew the plug below the machine to let the pressure
out of the boiler.
•
When all the pressure has been discharged, fully remove the plug.
•
Empty all the water in the boiler, shaking the machine gently to help empty the water.
•
Re-tighten the plug securely but without over tightening.
N.B. If the water collected is very dirty, you are advised to repeat the operation.
To restart the machine, follow the operations in the paragraph “Machine start”.
CAUTION
Check for any water leaks from the plug below the machine and tighten the plug if necessary.
Troubleshooting :
Steam leaks from accessories due to wear or
breakage of gaskets - Replace the gaskets on the connections making
sure you do not cut or mark the gasket and that
it is securely fitted in its housing.
Hose plug hard to insert in the machine socket - Do not force it in; lubricate the steam socket
connection on the machine with silicone
grease.
Machine heating time too long - Remove the scale from the boiler as described.
The pressure drops rapidly during operation - Remove the scale from the boiler as described.
The pressure rises rapidly and the pump
continues to fill the boiler with water - The scale must be removed from the level
probe. With the machine cold, pressure “0”,
unscrew the probe above the boiler and clean
any scale without using chemicals. Retighten
the probe and connect the wire above.
WARRANTY
DOMAN S.r.l. guarantees the product against all manufacturing or material defects for 12
months from the date of sale.
Warranty conditions:
•
The warranty does not cover failures resulting from normal machine wear.
•
The warranty lapses in the case of failures, problems or accidents caused by non-
observation of these instructions, poor maintenance or inappropriate use of the
machine.