Domain DM-DV5662NVU, Инструкция по эксплуатации

Страница: 9 / 29

8
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [
] icon in the user interface and the EQ setup
interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ User ] / [ Flat ] / [ Classic ]
/ [ Rock ] / [ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will
change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters adjustment
bar.
[ User ]: Set the desired audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this
featurewill selectively boost certain bass and treble
frequencies.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [
] icon in the user interface and the EQ setup
interface will display on the screen.
2. Adjust subwoofer volume
Touch [ ] / [ ] to adjust subwoofer volume from -12 to +12.
3. Adjust fade / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fade / balance value
from -20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Notes:
1. The parameters of the EQ modes has been preset and you can
not change them besides ‘User’.
2. The EQ mode will change to ‘User’ automatically when you adjust
the frequency value under the modes besides ‘User’.
3. The value of Sub is independent of EQ mode and can be adjusted
separately.
Basic Operations