THIS METHOD IS ONLY COMPATABLE WITH BED TYPES
THAT COMPLY WITH ALL OF THE CONDITIONS DESCRIBED
HERE:
•
THE SIDE SUPPORT OF THE CO-SLEEPER SHOULD
ALWAYS BE PLACED CLOSE TO THE ADULT MATTRESS.
•
THE MATTRESS SHOULD ALWAYS BE ALIGNED WITH
THE HEIGHT OF THE SIDE SUPPORT OF THE CO-
SLEEPER.
•
THE CO-SLEEPER SHOULD BE FIRMLY FIXED TO THE
STRUCTURE OF THE ADULT BED OR TO THE MATTRESS
SUPPORT.
CHECK TO MAKE SURE THAT THE BEDSIDE SLEEPER IN
THE CO-SLEEPER MODE DOES NOT INTERFERE WITH THE
ADULT BED.
DURING USE, MAKE SURE THAT THE ADULT BED SHEETS,
BLANKETS ETC, DO NOT ENTER THE CO-SLEEPER AND
COVER THE INTERIOR OF THE CO-SLEEPER. THIS CAN
CAUSE SUFFOCATION.
THE BEDSIDE SLEEPER CAN BE INCLINED WITH A
MAXIMUM VARIANCE OF 2 POSITIONS BETWEEN ONE LEG
AND THE OTHER (FOR EXAMPLE: THE RIGHT LEG IN
POSITION 3 AND THE LEFT LEG IN POSITION 1). THIS IS
ONLY MEANT FOR THE BEDSIDE SLEEPER IN BASSINET
MODE.
TO ADJUST THE HEIGHT
1.
The bedside sleeper can be adjusted to different height
positions. In order to adjust the height, press the height adjuster
button (A1) on both sides of the
bedside sleeper
and either lift
up or push down to get
to the desired position.
2. The base can be inclined slightly by adjusting the two legs to
different heights.
3. The co-sleeper is designed for use only with adult beds that are
between 18.5 and 24 inches (45 - 55 cm) from the floor to the top of
adult mattress.