Everyday operation
After you have set up the Dolphin Wave and configured it for the first time, the device is set
for everyday operation. When performing your next cleaning session, proceed as follows:
1.
Position the Caddy with robot about 0.5–1.0m (1.5-3ft) from the pool's edge with
its sloping edge facing the swimming pool ensuring that the floating cable is
facing the direction of the Dolphin Wave power supply unit.
2.
On the MMI, press
Pool.
The robot will starts moving towards the pool and enter it
and position itself on the pool floor.
3.
Wait for the
Wave
screen to appear.
To start the robot, press
Start
on the MMI. The robot starts its cleaning cycle and the
Countdown
screen displays.
At the end of the cleaning session, the robot stops automatically.
Removing the Robot from the Swimming Pool
1.
Press
HOME
.
The robot starts moving in the direction of the floating cable.
2.
Holding the floating cable, gently pull the robot upwards and towards the Caddy.
As it reaches the side of the pool, pull the cable gently until the floating cable handle
emerges. Grasp the handle, tilting the robot slightly allowing water to drain, place by
the pool side, or guide it onto the Caddy. The robot shuts down automatically.
For information about "
Configuring Additional Pool Profiles
"
–
please refer to page 12-18, Operating instructions booklet.
For information about the "
Remote Control Unit
"
– please refer to
page 20-21, Operating instructions booklet.
Maintenance
1.
Clean the filter bag as needed. When the MMI displays "Filter Bag Full", you
should clean the filter bag before the next operating cycle.
It is not necessary to stop the Dolphin Wave in the middle of the cycle
when the "Filter Full" indicator appears. Clean the filter before the next
cycle.
Filter bags can be cleaned in a washing machine.
2.
Keep the floating cable orderly enabling it to be rolled up easily and placed on the
Caddy's handle.
Important:
Every two or three cleaning sessions, disconnect the floating cable from
the power supply, unroll the entire cable and re-arrange it on the Caddy's handle as
required.
Содержание Wave 300 XL
Страница 1: ......