USER MANUAL
STM 429J – Scavenger Transmitter Module
© 2017 EnOcean | www.enocean.com
STM 429J User Manual | v2.0 | Nov 2017 | Page 14/ 17
3.4
Mounting 429J into a housing
The figure below shows an example of a housing in which the module can be mounted (with
antenna pointing to the left).
Design data of the housing and the modules is available in .igs format.
To prevent damage, please make sure not to exert shear force (side force within
the plane of the solar cell) onto the solar cell or the module itself!
The maximum vertical force onto the solar cell must not exceed 4 N and should be
homogeneously distributed!
Bending of the PCB must be avoided!
Please make sure that the housing covers 0.5 mm at the solar cell edges.
Within 0.5 mm off the edge flaking is possible due to the cutting process.
