© 2017 EnOcean | www.enocean.com
Sub GHz Transmitter Modules User Manual May 2017 | Page 10/35
USER MANUAL
PTM 330 / PTM 335 / PTM 330U / PTM 430J
Sub GHz Transmitter Modules
2.4.2
PTM 430J Configuration
Telegram content can be configured by via EnOcean Developer Kit (EDK 400J). PTM 430J
needs to be connected via bed of needle to the EnOcean programmer board (EOP 350).
Dolphin Module Configurator
(part of DolphinSuite)
is used to set configurations.
Connecting to SPI programming interface is done like PTM 330 via a bed of needle and the
EnOcean developer kit. Following figure shows basic principle:
Use Dolphin Module Configurator to change telegram coding and/or module ID length 32/48
bit to customer specific needs. Default configuration of the outgoing telegram coding is cor-
responding to the profile definition of the EEP F6-02-04. Please see chapter 3.7.
USB <=
> SPI
interface
SPI
USB
Dolphin Module Configurator
Reset
PROG_EN
ADIO7
SCSEDIO0
SCLKDIO1
WSDADIO2
RSDADIO3
PTM
PTM 430J
