MXS924 Users Guide
–
Dolphin Interconnect Solutions
Page 20
Press the [Browse] button to locate the binary on your disk and press the [Upload] button to perform the upload. You will
be provided with the new file name on successful upload, which will afterwards be present under the «Custom» group
and «Uploaded» type in the «Change» field set.
Uploading and applying configurations not provided or approved by Dolphin may break your hardware and will void your
warranty.
Delete configuration group
The «Delete» field set enable the user to clean up the list of uploaded configurations by deleting the entire «Custom»
group if present. This will only erase the available configurations on the switch and will not affect the PCIe switch and its
active configuration.
Reset switch
Press the «Reset Switch» to initiate a hardware reset of the PCIe switch chip. You will be prompted for confirmation.
Firmware section
The Firmware section is currently reserved for firmware upgrades containing only an «Upgrade» fieldset. Dolphin
’
s
MXS924 switch is pre-configured during manufacturing and a firmware upgrade is normally not required for default
operations. Please contact Dolphin support before trying to upgrade any firmware. Warranty is void if unauthorized
firmware upgrades are attempted.
