MXH94x / MXH95x Transparent Adapter User’s Guide –
Dolphin Interconnect Solutions
Page 10
If you are migrating from any of the PCIe Gen3 PXH84x adapter cards to the MXH94x or MXH95x cards, you need to uninstall the PX
software and install the MX software.
TIP:
Dolphin provides software and documentation for several product families;
please remember to select the MX product family
before downloading
. The MXH94x and MXH95x requires Dolphin software version DIS 5.18.0 or higher to operate.
The software download requires a password to log in.
The password will automatically be emailed to you if you follow the instructions
found on the getting started document bundled with the adapter card.
If you fail to provide the correct serial number found on the
getting started document, your request will be managed manually.
Step 7
–
Verify Installation & LEDs
The adapter card comes with 4 bi-color LEDs which show the corresponding cable port status according to Table 1: LED below.
The LEDs are visible through cut-outs in the PCIe bracket on each side of the cable connector block.
LED color
Function
Off
No cable installed
Yellow
Cable installed, no link
Green
Cable installed, link operational
Table 1: LED behavior
