MXH94x / MXH95x Transparent Adapter User’s Guide –
Dolphin Interconnect Solutions
Page 11
Operation
Configuration and DIP Switches
The adapter card has one bank of 8 DIP switches for setting special modes or operations, the meaning of each DIP switch depends on
the loaded firmware. Please carefully read the documentation shipping with the card before modifying any DIP switch settings. Please
pay close attention to ON and OFF positions written on the DIP switch.
The default factory setting for the transparent MXH94x / MXH95x is x16 link connection suitable for a two-node configuration.
DIP Switch Bank
–
Configuration
Figure 1: DIP Switch shows the DIP switch for the adapter card. It is used to select the operational
mode. Please leave all undocumented DIP switches in the default position. Table 2: DIP Switch
settings shows all the various DIP switch NTB settings for the adapter card.
DIP no.
Name
Description
ON
OFF
Default
1-5
OPT1-5
Configuration selector, details
below
OFF
6
OPT6
OFF
7
URES
Holds the management processors
in reset
Board management is
held in reset
Normal operation
OFF
8
SAFE
Enables the card to boot if the
EEPROM has been corrupted
Safe EEPROM
Normal operation
OFF
Table 2: DIP Switch settings
Note: DIP switch configuration options may be changed in the future versions. Please always consult the latest user guide
for details.
The table above is valid for firmware version 1 prerelease.
Figure 1: DIP Switch
