MXH932
User’s Guide –
Dolphin Interconnect Solutions
Page 12
DIP switch Settings
NOTE: The cards are shipped with default firmware version 1.0 to support a single x4, x8, or x16 link between two MXH932 cards.
Please contact Dolphin to receive a firmware to support other transparent configurations.
DIP Switch settings for MXH932 Host operation
The following DIP Switch settings should be considered when configuring the
MXH932 for Transparent Host
operation:
Use Case
Configuration MXH932 Host
DIP ON
DIP switch view
A+D
Transparent Host
One x16 downstream port
(P1+P2+P3+P4)
(all off)
(Shipping
Default)
DIP Switch settings for MXH932 Target operation
The following DIP Switch settings should be considered when configuring the
MXH932 for Transparent Target
operation:
Use Case
Configuration MXH932 Target
DIP ON
DIP switch view
A
Transparent Target
One x16 upstream port
(P1+P2+P3+P4)
One x16 downstream port
OPT-1
OPT-2
