Dolphin DOLKSF1000, Инструкция по эксплуатации

Страница: 10 / 12

Sound and Light Indication
Exit from the programming mode
Green light bright
Entered Program Step Incorrectly
Operation Status
Red LED Sounds
Power on
Stand by
Press Keypad
Enter Master Code Entry Mode
Green LED
ON
Single Flash
Single Flash
In program mode
Entered Program Step
Successfully
Entry Granted
Open lock
Alarm Mode Engaged
Alarm
Pressing * Toggles Standby /
Master Code Entry
Flashing
Flashing
Flashing
Flashing
Flashing
ON
ON
ON
Red light Shines
quickly
ON/Flashing
Short Single Beep
Short Single Beep
Short Single Beep
Short Single Beep
Short Single Beep
Short Single Beep
Short Single Beep
Short Single Beep
3 Short Beeps
One beep
Alarm
Beeps
OTHERS
Reset to Factory Default:
This will reset the DOLKSF1000 to the factory default but PIN information
will still be retained.
1. Power the DOLKSF1000 off.
2. Press and hold the * button while power is restored to the DOLKSF1000
3. There's two beeps, and release the button, then one beep.
The DOLKSF1000 has been successfully reset.
Erase all Cards:
This will delete ALL User data.
1. Enter Program Mode by press: *(Master Code) #.
2. Press 20000 #
3. Exit:
All configuration data is retained.
Reset Strike-Out Alarm
Enter Master Code or Valid PIN to silence