S2
S2
390 MHz
315 MHz
Back of
Keypad
a. Remove the access door on the top back of the keypad by sliding the door
in the direction of the arrow. (see Figure 1)
b. Locate the frequency switches on the top of the electronic board located
inside of the access door. (see Figure 2)
3. SET FREQUENCY JUMPER
a. Determine the operating frequency you will use on your keypad installation.
This keypad can operate at either 315 MHz or 390 MHz. At 315 MHz the keypad is
compatible with all 315 MHz receivers with 9 dip switches. At 390 MHz the keypad
is compatible all 390 MHz receivers with 9 dip switches. (see S2 on Figure 3)
3
Figure 3
Figure 1
Figure 2
jumper
in place
access
door
S2
S2
S1
S2 315MHZ 390MHZ
1-2
2-3
DIP
390 MHz
315 MHz
