DB 1675
|
Dolphin Blue
|
3
WATER PRESSURE
This mixer is suitable for use at all supply pressures. However for optimum use
both the hot and cold supplies should be reasonably balanced.
If the fitting is installed at low pressure (tank fed), then the minimum distance
from the outlet of the nozzle to the underside of the cold tank should be
approximately two metres to ensure adequate performance.
This mixer should be installed in compliance with water regulations. Where the
supplies are from the mains or are unbalanced, ie hot water from the cylinder
tank/cold from the mains, approved check valves must be fitted in the supply
pipes. For further details contact your Local Water Authority.
Check minimum and maxium dimensions (check drawing)
PRE INSTALLATION
