manualshive.com logo in svg

Dolphin BC633F, Руководство по установке и обслуживанию

Поделиться
Скачать
Dolphin BC633F Скачать руководство пользователя страница 4

4 

|  

Dolphin

| 

BC 633F

PRE INSTALLATION INFORMATION

Check contents

Separate all parts from the packaging and check each part with the “Pack contents”

section.

Make sure all parts are accounted for before discarding any packaging material.

If any parts are missing, do not attempt to install your touch free soap dispenser

until you obtain the missing parts.

Warnings

Do not install your electronic soap dispenser facing a mirror or any electronic system

operated by an infrared sensor.

To prevent reflection problems, it is recommended to keep a minimum distance of 5’

(1.5m) between the soap dispenser sensor and any other directly facing objects and

a minimum of 6” (150 mm) between the soap dispenser and the adjacent  tap.

IMPORTANT

: Keep in mind that when using the  tap installed next to the soap

dispenser, the user hands should not interfere with the soap dispenser sensor

detection area.

Correct Installation

Incorrect installation

DO NOT AIM SOAP SENSOR

AT WATER  STREAM

Содержание BC633F



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды