SW.FOR HEATER
B. Heater Element Switch ON/OFF
1.Switch off the power, loosen the cover screws and remove the cover.
2.Adjust the heater switch on the PCB with a small
plastic or wood flat blade probe.
2-1. Heater ON: Slide the switch to "ON".
2-2. Heater OFF:Slide the switch to "1".
Operation
C. Sensor range adjustment
VR.FOR SENSOR
1.The recommended unit sensor range is 150mm.
This can be adjusted from 120mm to 220mm.
2.
Clockwise: Increases the sensing range(+) .
3.Counterclockwise
:
Decreases the sensing range(-) .
4.DO NOT OVERTURN!
Surface-mounted high speed hand dr
i
er
Operating Instructions and Parts Manual
Hand drier
Settıng Adjustmenet
A. Warm air speed adjustment
Unfasten the screws with a Phillips screwdriver.
Dispose of the old filter properly.
Clean the filter holder thoroughly.
Plcae the new filter in the filter holder .
Change filter assembly
IItt iiss rre
ecco
om
mm
me
ended to change the filter every six months.
Fasten the screws with a Phillips screw driver.
Use phillips screw to adjust air speed.
Install the cover once adjustment is completed.
Clockwise: Increases the air speed(+) .
Counterclockwise
:
Decreases the air speed(-) .
VR.FOR AIR SPEED
Turn off power to the dryer at electrical panel.
Remove cover.
DB2005
DOLPHIN HIGH SPEED HAND DRYER
User Manual
www.dolphinsolutions.co.uk
