5
The lower frame has an H shape that provides
an equal amount of space troughout.
Set the external dimensions that are required to
negotiate the most narrow passage in the residence.
The frame is lowered at the rear edge to
facilitate movement to and from bed.
Clearance is 190 mm with the 100 mm
wheel fixture.
Adjustment
1. Height adjustment
Hold the side of the armrest, pull out the pin
and set the required height.
NB! Do not pull out the pin if the user is
putting weight on the support platform
Lift the lever upwards and adjust the support
platform to the required height.
Use the hand control to adjust the support
platform upwards or downwards.
2. Emergency stop and emergency lowering
If it is necessary to make an emergency stop
press the red button (A) on the right of the
control unit. Turn the same button clockwise to
reset.
If emergency lowering is necessary, press the
button on the front of the control unit (B).
3. Adjustment of width between armrests
Loosen the knob that is located between the arm-
rests and adjust sideways to the required width.
Always adjust the armrests symmetrically and lock
them again by doing up the knob.
4. Handle adjustment
Undo the knob that is located under the armrests
and adjust the handles to the required depth and
angle. Lock the handles by retightening the knob
again.
A
B
DOLOMITE
STEP UP
DOLOMITE
STEP UP
DOLOMITE
STEP UP
DOLOMITE
STEP UP
125 mm
215 mm
1.
2.
3.
4.
