19
5
7
6
4
5
1
2
3
Lift the chain (
6
) over the sprocket (
5
). Using your right hand, guide
the chain into the top guide groove on the guide bar (
7
).
CAUTION:
Note that the cutting edges along the top of the chain must
point in the direction of the arrow!
Position the guide bar (
4
) and push against the sprocket (
5
)
as shown by the arrow.
Mounting the guide bar and saw chain
Use the universal wrench delivered with the chain saw for the
following work.
Put the chain saw on a stable surface and carry out the following
steps for mounting the guide bar and saw chain:
Release the chain brake by pulling the hand guard (
1
) in direc-
tion of arrow.
Unscrew retaining nuts (
2
).
Pull off the sprocket guard (
3
).
C
D
PUTTING INTO OPERATION
CAUTION:
Before doing any work on the guide bar or chain, always
switch off the engine and pull the plug cap off the spark
plug
(see "Replacing the spark plug")
. Always wear protec-
tive gloves!
CAUTION:
Start the chain saw only after having assembled it com-
pletely and inspected.
B
A
