26
14
B
Cleaning the cylinder area
After prolonged use, dirt and sawdust can build up on the cylin-
der and cause the engine to overheat. The cylinder fin cleaner
helps remove deposits between the cylinder fins and between
the cylinder and the mounting plate.
Remove cover.
Remove the fan housing.
CAUTION: To prevent eye injury, always wear eye protection
when cleaning the filter with compressed air!
The entire area (14) can now be brushed clean or cleaned with
compressed air.
With the cyinder fin cleaner, clean out the area between the
cylinder fins and between the cylinder and the mounting plate.
Do not use force. Be careful not to damage the short-circuit
wire and the ignition wire.
15
C
Replacing the suction head
The felt filter (15) of the suction head can become clogged.
It is recommended to replace the suction head once every
three months in order to ensure unimpeded fuel flow to the
carburetor.
To remove the suction head for replacement, pull it out through
the tank filler neck using a piece of wire bent at one end to
form a hook.