7/23
Dolezych
-
Original operating instructions
•
The product may only be suspended in the fitting parts or body parts
provided for this purpose.
•
The product must not be used for lifting.
•
Never hook fittings between the layers of a chain link.
•
Observe temperature ranges (see chapter 3.2).
•
In general, avoid contact with chemicals (see chapter 3.2).
•
During cutting, grinding or welding work, the products must be protected
against flying sparks.
•
For loads with rough surfaces, the product may only be used if the
endangered areas are protected.
•
Edge protectors must be used for sharp-edged loads (see chapter 5.1).
•
If the product is used with protective hoses, then care must be taken that
the product is not damaged under these protective hoses.
•
Do not use the product when it is knotted.
•
Do not use product if twisted. Straighten the twisted chains before loading.
A maximum twist of 180° per 0.5 m chain length is permissible.
•
Do not place any loads on the product.
•
Do not drive over the product.
•
Lashing hooks must not be loaded on their tip unless it is a hook for that
specific purpose. Lashing hooks should have a safety device to prevent
accidental unhooking.
•
Tensioning and connecting elements must not be subjected to bending
stress. To avoid bending stress, tensioning and connecting elements must
not rest on edges.
•
Regularly retension the lashing equipment. Vibrations, shock loads and
settling processes can cause the applied pretensioning force to decrease.
This also applies if the secured load is not moved.
•
Due to different properties (e. g. change in length under load), all lashing
strands used to lash a load must have the same properties. The lashing
strands can also consist of combined lashing equipment.
•
Regularly maintain the tensioning element (oil or grease moving parts).
•
Do not turn the spindles of the ratchet load binder against the stops of the
unscrewing lock.
•
Work gloves must always be worn when working with lashing equipment.
Due to the mechanically moving components, there is a risk of crushing and
injury!
