DOLD SAFEMASTER C UG 6960, Руководство по эксплуатации

Страница: 24 / 40

24
UG 6960 / 05.12.17 en / 947
Safetyfunction: see below, Manual-Start (for automatic start make a bridge to ST2 instead of ON button).
Delay function: release delay (1)
K1/K2 instantaneous contact, K3/K4 delayed contact
DC24V
0V
A1+
A2
K8
K6
K7
K5
ST2 S21 13 47 23 57
+ +
24 58 38 68 14 48
M10780_b
K1 K3
K1 K3
K2 K4
K2
K4
UG6960
K5 K6 K7 K8
S22 S11 S12
Safetyfunction
ST1
On
Reset
RES
S22 S11 S12
M10757
Not-
Aus
S21
S21 S22 S11 S12
Schiebeschutztür
geschlossen
M10756
S1
S2
S22 S21 S11 S12
M10750
Fct.: E-stop (1),
with cross fault detection
SIL 3, PL e, Cat. 4 Fct.: Safety gate (2),
with cross fault detection
SIL 3, PL e, Cat. 4 Fct.: Two-hand control (3),
with cross fault detection
SIL 3, PL e, Cat. 4
Type III C to EN 574
S21 S22 S11 S12
Schaltleiste
M10754
S22 S11 S12 S12
S1
M11124
S21 S22 S11 S12
M10753
Not-
Aus
S21
Fct.: Safety mat / Safety edge (4),
with cross fault detection
SIL 3, PL e, Cat. 4 Fct.: Exclusive or contacts (5),
with cross fault detection
SIL 3, PL e, Kat. 4 Fct.: E-Stop (6),
without cross fault detection
SIL 3, PL e, Cat. 4
1)
S21 S22 S11 S12
Schiebeschutztür
geschlossen
M10752
OSSD1 OSSD2
S22 S21 S11 S12
Sender
Empfänger
DC 24V
0V
M10751
1)
To achieve the stated safety classification the
wiring has to be done with crossfault monitoring.
2) To achieve the stated safety classification
light curtains with selftest (type 4) according
to IEC/EN 61496-1 have to be used.
Fct.: Safety gate (7),
without cross fault detection
SIL 3, PL e, Cat. 4
1)
Fct.: Light curtain (8),
without cross fault detection
SIL 3, PL e, Cat. 4
2)
Application Examples with safety function
Safetyfunction: see below, Manual-Start (for automatic start make a bridge to ST2 instead of ON button).
Delay function: release delay (1)
K1/K2 instantaneous contact, K3/K4 delayed contact
DC24V
0V
A1+
A2
K8
K6
K7
K5
ST2 S21 13 47 23 57
+ +
24 58 38 68 14 48
M10780_b
K1 K3
K1 K3
K2 K4
K2
K4
UG6960
K5 K6 K7 K8
S22 S11 S12
Safetyfunction
ST1
On
Reset
RES
S22 S11 S12
M10768
emergency
stop
S21
S21 S22 S11 S12
Sliding door
is closed
M10778
S1
S2
S22 S21 S11 S12
M10750
Fct.: E-stop (1),
with cross fault detection
SIL 3, PL e, Cat. 4 Fct.: Safety gate (2),
with cross fault detection
SIL 3, PL e, Cat. 4 Fct.: Two-hand control (3),
with cross fault detection
SIL 3, PL e, Cat. 4
Type III C to EN 574
S21 S22 S11 S12
safety edge
M10774
S22 S11 S12 S12
S1
M11124
S21 S22 S11 S12
M10772
emergency
stop
S21
Fct.: Safety mat / Safety edge (4),
with cross fault detection
SIL 3, PL e, Cat. 4 Fct.: Exclusive or contacts (5),
with cross fault detection
SIL 3, PL e, Kat. 4 Fct.: E-Stop (6),
without cross fault detection
SIL 3, PL e, Cat. 4
1)
S21 S22 S11 S12
Sliding door
is closed
M10770
OSSD1 OSSD2
S22 S21 S11 S12
Transmitter Receiver
DC 24V
0V
M11317
+ +
1)
To achieve the stated safety classification the
wiring has to be done with crossfault monitoring.
2) To achieve the stated safety classification
light curtains with selftest (type 4) according
to IEC/EN 61496-1 have to be used.
Fct.: Safety gate (7),
without cross fault detection
SIL 3, PL e, Cat. 4
1)
Fct.: Light curtain (8),
without cross fault detection
SIL 3, PL e, Cat. 4
2)
Application Examples with safety function
E. DOLD & SÖHNE KG • D-78114 Furtwangen
e-mail: dold-relays@dold.com • internet: http://www.dold.com
•
PO Box 1251 • Telephone (+49) 77 23 / 654-0 • Telefax (+49) 77 23 / 654-356