3
1.
Top assembly
2.
Bottom assembly
3.
Measuring cup
4.
Instruction manual
Package Includes:
assembly:
storage:
1.
Place the base unit of the popcorn maker on a flat stable surface
2.
Lower the support tabs on the front and back of the unit as shown below in Image 1.
3.
On a 45° angle rest the indents of “Top Assembly” on the front and back support tabs of the “Bottom
Assembly”.
4.
Gently lower the ‘Top Assembly’ until you hear the rear support click as shown below in Image 3. Make sure
the “Top Assembly” is securely attached before releasing your grip.
note:
Always allow the unit to cool completely before storing.
Carefully remove the top of the popcorn maker as shown below:
1.
Tilt the ‘Top Assembly” to a 45° angle to detach it from the ‘Bottom Assembly’ as shown in Image 4.
2.
Raise the support tabs on the front and back of the unit as shown below in Image 5
3.
Wind the cord into the area provided located on the bottom of the unit
4.
Place the top potion over the base of the unit as shown in Image 6 below.
5.
When properly stored the unit should be completely collapsed as shown in image 7 below.
Image 4
Image 5
Image 6
Image 7
Image 1
Image 2
Image 3