Dolby Laboratories DSP100, Руководство пользователя

Страница: 62 / 76

50 Dolby ® Digital Cinema Presentation System User’s Manual
System Maintenance
5. Position the replacement power supply squarely within its slot, as shown in
Figure 4 ‐ 13, then push it along the guiding surface until it snaps into place. You
should hear a click when it seats properly in the rear panel.
Figure 4-13 Inserting the Replacement Power Supply
6. Use a Phillips screwdriver to reinstall the retaining clip with its two screws, as shown
in Figure 4 ‐ 14.
Figure 4-14 Reinstalling the Retaining Clip