Dolby Laboratories CP750, Руководство пользователя

Страница: 36 / 85

24 Dolby
®
CP750 Digital Cinema Processor Manual
Configuring the CP750 Software
Time and Date
You can change the time manually by dialing with the arrows in the Apply Time field.
You can also load the local time from a server by clicking the Load Local Time button.
You must click Apply to make changes to the unit’s stored date and time.
4.1.3 General Settings
This tab, shown in Figure 4 ‐ 3 , lets you set four system attributes:
• Power ‐ On Mode
• Surround Delay
• Main Output Configuration and HI/VI ‐ N Options
• Mute Duration
Figure 4 ‐ 3
Figure 4-3 General Settings Tab
Power-On Mode
The Power ‐ on Mode selects the input that is activated when the CP750 unit is powered on.
You can select Last Setting , or any of the inputs.
Surround Delay
The setup application can calculate and set the General surround delay value based on
theatre measurements entered here. Measurements may be entered in feet or meters.
1. Click Feet or Meters to choose a unit of measure.
2. Enter a Distance from screen to rear wall of theatre value between 0 and 200.
3. Enter an Average distance between left and right Surround channels value between
0 and 140.
4. Click Calculate .