Attributes
Description
Does the voice VLAN have
access to the Internet via the
above proxies?
If no, the phone cannot be placed in the voice VLAN and must be
placed in the data VLAN.
Do the LAN switches support
Power over Ethernet (PoE)?
The phone requires 13 W of power to be delivered over the LAN
cable. A power injector (not supplied) may also be used if PoE
switches are not present.
2.2 Plugging in and setting up the phone
automatically
Each Dolby Conference Phone requires a wired network connection, preferably supporting
PoE. Once your phone is plugged in, many settings may be automatically detected.
Prerequisites
The Dolby Conference Phone requires 13 W of power to be delivered over the LAN cable. If
your Ethernet LAN switch ports do not support PoE, you will need a PoE injector (not
supplied) for each phone.
Procedure
1. Plug in the phone.
If the customer network is already set up with either Dynamic Host Configuration
Protocol (DHCP) option 66 or Domain Name System (DNS) SRV record, the phone
automatically detects the presence of Dolby Conferencing Console or a provisioning
server, which saves you having to manually enter data.
If the customer network is not set up, you see this screen:
2. Select
Manual setup
, and follow the screen prompts if automatic discovery is not
available on the customer network.
2.3 Configuring 802.1X
If your network requires 802.1X authentication, use the touch screen to accept the
authentication server certificate and enter credentials.
About this task
The network setup wizard detects many of the settings for you, including your VLAN and
Internet Protocol (IP) network settings. In this figure, the Dolby Conference Phone has
detected those settings upon initial setup.
Configuration procedures
Dolby Conference Phone version 3.1 configuration guide for BT MeetMe with Dolby Voice
22 February 2017
7