dol sensors iDOL 65, Руководство пользователя, Страница: 9 / 12

iDOL 65 Camera www.dol-sensors.com 9
8 Maintenance
The iDOL 65 itself does not need maintenance, but must be cleaned regularly as dust and excrements from
flies etc. might block the sight of the camera and hinder heat produced by the iDOL 65 to be led away.
Clean the iDOL 65 with water added a little dishwashing liquid and a soft brush or cloth. Do not use:
• High-pressure cleaner
• Highly compressed air
• Window cleaning spray
• Solvents such as acetone, benzene, Carbon Tetrachloride and the like
• Corrosive/caustic agents
• Alcohol-based disinfectants
Wipe the front dry after cleaning.
Make sure not to move the camera during cleaning. If the position of the iDOL 65 is changed, the camera
needs to be re-calibrated.
9 Technical data
Supply voltage VAC 100 - 240
Frequency range Hz 50/60
Power consumption W max. 13
Ambient temperature, operation °C -10 - +35
Ambient temperature, storage °C -25 - +60
Ambient humidity, operation %RH 10 - 90
Cable Current 3 x 0.75mm2/AWG 18
LAN Minimum CAT5e
Weight g 1100
Dimensions mm L x W x D
200 x 190 x 80
Measurement, shipment mm L x W x D
315 x 250 x 180
Degree of protection IP 65
IK20
Approvals IEC 62368-1, Ed. 2.0
ANSI/UL 62368-1-2014
CAN/CSA C22.2 No. 62368-1-14
For information about the Open source license terms, see https://www.dol-sensors.com/terms-conditions/ .
This product contains a Class 1 Laser unit under the EN/IEC 60825-1, Edition 3 (2014) interna-
tionally.
The laser unit complies with FDA performance standards for laser products except for confor-
mance with IEC 60825-1 Ed. 3 as described in Laser Notice No. 56, dated May 8, 2019. 9.1.2.