Technical User Guide
iDOL 20SCR
3
If the max. current (Ie) is exceeded, the sensor will try to change from OFF to ON 6 times, at the same time as
quick pairwisered LED flashes occur.
4 User Guide
When there is material in front of the sensor, the output is in the reference position (OFF). When the material
disappears, the timer, starts, and the output will change to on after the set delay.
The status of the sensor is indicated with a red LED.
The sensor sensitivity and delayed disconnection can be adjusted via the SmartAdjust app.
ON
OFF
Sensor
LED
Contact
ON
ON
OFF
OFF
Delayed disconnection:
fixed delay
or
delay can be adjusted via the SmartAd-
just app.
Delayed connection:
fixed delay
or
delay can be adjusted via the SmartAd-
just app.
Sensitivity:
fixed distance
or
distance can be adjusted via the
SmartAdjust app.
MaxRun-timer:
iDOL 20 SCR adjustable 1-7200s via SmartAdjust app
5 Maintenance
If the sensor is located in a particularly dirty environment, it may be necessary to clean the area around the
sensor.
Otherwise, no additional maintenance is required.
6 Technical data
Electrical
Rated voltage (Ue)
V AC
V DC
20 - 280
20 - 280
Frequency
Hz
47 - 63
Max. current (Ie)
mA
500
Direct connection to Ue (current >>
500 mA) without damage to the
sensor
Times
> 10
Min. ON current (Im)
mA RMS/DC
< 10 (Ue = 20 - 90)
mA RMS/DC
< 4 (Ue = 90 - 280)
OFF current (Ir)
mA RMS/DC
< 3 (Ue = 20 - 90)
mA RMS/DC
< 1 (Ue = 90 - 280)
Voltage drop (Out) (current > 20
mA)
mA
RMS/V DC
< 6
Time delay, start-up
ms
< 150
Time delay, ON (adjustable)
s
0 - 3600
