Quick Reference Guide CPN-1
DOKKi
.eu
POSITIONING
The CPN-1 has rubber feet on the bottom and can be used on a flat surface. Please make sure the CPN-1 is positioned on a firm
background which is level.
POWER AND CONNECTION
Plug the USB cable into the mini USB connector in the rear of the CPN-1.
The CPN-1 is now ready for use.
DOCKING YOUR SCANNER
Hold the scanner between your thumb and index finger near the scanwindow on the OPN's body with the USB connection facing down.
Simply connect your OPN scanner to the docking station by gently placing the OPN over the CPN to align the connectors. When aligned
press the scanner down to secure the connection.
Press firmly but never use excessive force when pressing down as this
might damage the connectors!
Always check for obstructions on both connectors before trying to
dock the scanner.
ACCESSORIES
•
none at the moment
Check our website for the latest available accessories.
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CPN-1_QRG-001 / September 2014
CPN-1 with USB
cable connected
