Setup -
Setting Up
Dojo
5
Connecting the Dojo Base Unit to the Router
There are two modes for connecting the Dojo base unit to the router, depending on the way
your home network is set up:
•
Router mode
: When using your service-provider router only. The connections look like
this:
Figure 2: Router setup
•
Bridge router
: When using both your service-provider router and an additional Wi-Fi
router. The connections look like this:
Figure 3: Bridge setup
It is important to understand which setup your network uses, both for the physical setup and
software configuration.
Router Mode
1. Plug one end of the provided Ethernet cable into the
ETH2
port of the Dojo base unit,
as shown in Figure 4 then plug the other end into an available port in your ISP Wi-Fi
router.