9
When flashing
and
was acknowledged with
,
flashes.If
you do not want to supply CO² to your aquarium in the night, press
or
button to change to and acknowledge by pressing
.
Presetting value or your last programmed value flashes in the display.
Set the desired start of night time in hours with the
or
button, then
acknowledge with
.
Presetting value or your last programmed value flashes in the display.
Set the desired start of night time in minutes with the
or
button, then
acknowledge with
.
Caution:
Here (displayed right down site) is the time when the
stop of CO² supply should beginn, for example at
when your
lighting is switched off.
Presetting value or your last programmed value flashes in the display.
Set the desired end of night time in hours with the
or
button, then
acknowledge with
.
Presetting value or your last programmed value flashes in the display.
Set the desired end of night time in minutes with the
or
button, then
acknowledge with
.
Caution:
Here
(displayed right down site) is the time when the
stop of CO² supply should end, for example at when your lighting
is switched on.
Please note:
When the night off beginning time is reached the display
shows a measured but not regulated pH value. Left below and right
below
is displayed.
When finished,
will flash again. Scroll to the next main menu item with
the
button, then press the
button.