Operating Instructions
R9/R9V and R7mini Receivers
R9 Receiver
R9 Vibration Receiver (R9V)
R7mini Receiver
Страница 1: ...Operating Instructions R9 R9V and R7mini Receivers R9 Receiver R9 Vibration Receiver R9V R7mini Receiver ...
Страница 2: ...e end of the battery must be inserted down R7m Battery The R7m receiver is powered by a 3 volt 1 3 N lithium battery With normal use the battery should last about six months The negative end of the battery must be inserted down R7m R9 and R9V Receiver Insert battery NEGATIVE end down Resetting the Battery Status Light 1 Remove the old battery 2 Let the receiver sit for five minutes before insertin...
Страница 3: ...ults to the original setting Receiver Features Status Light Start Up When you first insert the battery into your receiver the status light will flash red and green This indicates that the receiver has started properly Once started the status light will continue to flash green once every 40 seconds indicating normal operation In the event that the light does not flash check the battery to be sure t...
Страница 4: ...1 your dog will receive a slow correction If you switch your Transmitter to QuickAlert your dog will now receive a fast correction AutoMemory self activates and advances to the next level RECEIVER TRAINING LEVELS TRANSMITTER MODE AND RATE SETTINGS Mode A Rate 1 Mode A Rate 2 Mode A Rate 3 Mode B QuickAlert Audible Only Transmitter Rate Fixed at Medium extra low 1 Slow Medium Fast Slow low 2 Slow M...
