Dogtra T&B DUAL, Руководство пользователя

Страница: 30 / 46

30
10. Using the Test Light
1. To turn on the receiver, place the red dot on the back
of the transmitter to the red dot on the receiver. Hold
the two red dots together for a moment until the LED
light on the receiver comes on. The indicator light
will come on for a moment then blink once every 4
seconds, showing that the receiver is ready to use (the
receiver needs to be charged if the indicator light is
red). The receiver will emit a melody when turned on.
2. Turn the transmitter on by pressing the on/off button
on the right side of the transmitter until the OLED
screen illuminates. The LED will blink every 4 seconds
and the OLED screen will show the remaining battery
life (the transmitter needs to be charged if there is
only 1 bar showing on the battery icon for the OLED
transmitter screen).
3. Place the test light, included in the package contents,
on the contact points as shown in the diagram. Watch
the test light as you push the Nick button on the
transmitter. It should light up for just a moment. The
higher the intensity, the brighter the test light will be.
4. Watch the test light as you press the Nick button on