42
43
OVERVIEW
The Dogtra RB 1000 Series has a remote beeper with three
different modes. The LCD screen will display the mode on the
front of the transmitter. To activate the transmitter, press and
hold the blue button on the right side of the transmitter until both
the LCD and LED window illuminates. Next, hold the two red
dots on the transmitter and receiver together until the receiver
light starts blinking. The receiver/collar’s LED window will
blink green every 4 seconds to show that the unit is on and fully
charged.
The Dogtra RB 1000 Series has three beeper modes: Run/ Point,
Point-Only, and Locate. Locate is available anytime by pressing
the top orange button on the left side of the transmitter. To activate
the other beeper modes, press the Run/Point button or Point
button on the front of the transmitter . In the Run/Point mode, it
will double beep every 7 seconds while the dog is running. While
the dog is on point or stationary it double beeps every 2 seconds.
In the Point-Only mode, the unit will not beep while the dog is
moving (you can use the Locate mode for locating your dog).
When the dog points or becomes stationary, the unit will emit a
double beep every 2 seconds.
(
Orange Collar :
double beep,
Green Collar :
single beep)
The Locate feature can be used at any time, it will beep as long as
you press and hold the button (for up to 12 seconds).
Remember, the Locate button can still be used at any time!!
The Dogtra RB 1000 Series has four different sounds. It can be
selected by pressing the Sound button below the Locate button on
the left side of the transmitter .
The Dogtra RB 1000 Series is also available for the two-dog
model. The collars are color-coded (orange and green) you can
select between the two collars with a toggle switch located on the
transmitter.
The orange collar emits a double beep in all modes and the green
collar emits a single beep in all modes. This gives you the ability
to differentiate between dogs when both are out of sight.
Содержание RB 1000
Страница 1: ......
