27
11. Using the Test Light
1. Turn on the receiver by pressing the on/off button. The
indicator light will come on for a moment then blink
once every 4 seconds, showing that the receiver is
ready to use (the receiver needs to be charged if the
indicator light is red).
2. Turn the transmitter on by holding down the on/off
button on the right side of the transmitter. The LED will
blink every 4 seconds and the LCD screen will show
the remaining battery life (the transmitter needs to be
charged if there is only 1 bar showing on the battery
icon for the LCD transmitter screen).
3. Place the test light, included in the package contents,
on the contact points as shown in the diagram.
4. Watch the test light as you push the Nick button on the
transmitter. It should light up for just a moment. The
higher the intensity, the brighter the test light will be.
5. Watch the test light as you push the Constant button
on the transmitter. It should light up as long as the
button is pressed. However, as a safety feature, the
receiver will automatically stop the stimulation if the
Constant button is pressed for 12 seconds or longer.