DMF series - Torque reaction arms
60353-12/20
24
2.4.7 Rotating clamp mounting
Mount the bronze ring on the screwdriver ensuring that the two half-shells are
flat (A on the plane).
Mount the screwdriver/bronze ring assembly into the clamp, tightened to the
maximum. Then slowly tighten the screws of the bronze ring until it starts to
turn.
2.4.8 Standard clamp tool installation
Clamp tool with the clamp as follows:
- Loosen the screws with an appropriate wrench.
- Position the tool in the clamp at a location where the tool is cylindrical and
allows for mounting.
- Tighten screws moderately until the tool is firmly clamped.
Information
Excessive clamping may affect the operation of the tool mounted on
the arm.
Warning
Iinsufficient clamping will not guarantee the cancellation of the torque
reaction effect.
