Dog trace d-control 1020, Руководство пользователя

Страница: 7 / 21

7
INSTALLATION (REPLACEMENT) OF THE BATTERY IN THE REMOTE CONTROLLER
}
Remove the cover of the battery compartement and insert 2 LR6 alcaline batteries.
Mind the correct polarity marked in the battery compartement.
}
Replace the cover and tighten the screw.
Checking the battery status
Look at the LCD display to check the battery status:
}
Fully charged battery: full battery symbol shines in the LCD permanently in on state.
}
Weak battery: LCD display indicates battery capacity decrease. In case the battery symbol
is empty, insert new LR6 batteries according to the instructions above.
Make sure that the receiver works correctly.
NOTICE: you can also use rechargeable batteries in the remote controller.
They do not provide enough voltage for correct battery status indication
on the LCD.
CAUTION: Always switch off the remote controller before battery removal,
remove the battery and shortcut battery contacts using a metal tool.
}