A-113
Subharmonic Generator
System A - 100
doepfer
8
4. In / Outputs
!
In
Socket
!
is the subharmonic generator’s audio input.
Connect up the signal you wish to use as master
frequency signal (normally the rectangle output of a
VCO).
"
Foot Ctr. In 1 •
§
Foot Ctr. In 2
The gate inputs
"
and
§
are used to
select the
mixture
. Any gate type signals may be used (e.g. Foot
Controller, Sequencer gate outputs, MIDI interface)
(see fig. 7).
Fig. 7
: Selecting mixtures with gate signals
(0: gate = low or no gate signal applied,
1: gate = high)
The mixture is displayed with the decimal points (see
chapter 3, fig. 5).
$
Single Out
Sockets
"
outputs the
single subharmonic
of the
respective frequency divider. The attenuators
4
do not
affect the level at these sockets.
%
Mix Out
At output
§
the mix of the 4 subharmonics adjusted
with the 4 attenuators
4
is available.
Foot Ctr.
In 1
Foot Ctr.
In 2
Mixture
Display example
0
0
"00"
0
1
"01"
1
0
"10"
1
1
"11"
