SERVICING AND MAINTENANCE
111
Auxiliary Switches — If Equipped
Four or six auxiliary switches may be located in
the lower switch bank of the instrument panel
and can be used to power various electrical
devices.
The functionality of the auxiliary switches can
be changed via the Uconnect Settings. All
switches can be configured for setting the
switch type operation to latching or momentary,
power source of either battery or ignition, and
ability to hold last state across key cycles.
Auxiliary Switch Location
NOTE:
Holding last state conditions are met when
switch type is set to latching and power source
is set to ignition within Uconnect Settings.
The auxiliary switches manage the relays that
power four or six blunt cut wires. These wires
are located under the hood to the right, near the
battery.
In addition to the four or six auxiliary switch
wires, a fused battery wire and ignition wire are
also found in this location.
A kit of splices and heat shrink tubing are
provided with the auxiliary switches to aid in the
connection/installation of your electrical
devices.
8
21_DT_TRX_SU_EN_USC_t.book Page 111