Dodge DURANGO SRT 2019, Дополнение к режиму вождения

Страница: 33 / 38

The Shift Light RPM Set-Up allows you to set the shift light to illuminate for
gears 1, 2, 3, 4, and 5-8. Pressing and releasing the up/down arrow buttons
above and below each listed gear, the RPM values will change in incre-
ments of 250 RPM. The Shift Light setup screen may only be accessed if
the feature is enabled, press the “Reset to factory default” button on the
touchscreen to change back to factory settings, or press the “Shift Light
Off” button on the touchscreen to turn the system off completely.
Race Cooldown — If Equipped
Race Cooldown, if equipped, is a selectable After-Run Cooling Feature.
Race Cooldown, if equipped, is a feature activated by selecting the Race
Cooldown button under Race Options within the Drive Modes pages.
To enable this feature, the vehicle will check to ensure the engine is off, the
hood is closed, the status of the battery and system are good, and
determine if cooling is required.
After making a pass down the drag strip, this feature helps cool the car after
the engine has been shut down. The radiator fan and low temperature
radiator coolant pump remain on after engine shutdown for a period up to
10 minutes or until target temperature is reached.
A graph in the radio can show the resulting intercooler coolant temperature
in real time while the vehicle ignition is in run position with the engine off.
NOTE: Race Cooldown feature (After-Run) will only come on with engine
off. The temperature will display with engine running also, but After-Run
Cooling will not be functioning.
Shift Light RPM Set-Up
S R T D R I V E M O D E S
31