48
MULTIMEDIA
Do not spray any liquid or caustic chemicals
directly on the screen! Use a clean and dry
micro fiber lens cleaning cloth in order to
clean the touchscreen.
If necessary, use a lint-free cloth dampened
with a cleaning solution, such as isopropyl
alcohol, or an isopropyl alcohol and water
solution ratio of 50:50. Be sure to follow the
solvent manufacturer's precautions and
directions.
NOTE:
It may be necessary to rotate the PC screen to
fit the touchscreen and can be done by holding
the CNTL and ALT keys at the same time and
push the Arrow key(s) on the PC until the screen
fills the touchscreen.
Uconnect Button
Touchscreen Buttons
Press the Uconnect button on the touchscreen
to toggle between split screen view and full
screen view.
PC 1 And PC 2 Buttons
These touchscreen buttons will automatically
highlight once one or two active PC’s are
detected. Press the desired button to toggle
between PC 1 and PC 2. In order for two PC’s to
be accommodated, you must supply your own
router connected to the ethernet cable. PC 1
and PC 2 are determined by which PC connec
-
tion is detected first. When PC 1 is discon
-
nected, PC 2 will remain as PC 2 until the
system or vehicle is restarted.
NOTE:
In order for two PC’s to display correctly on
the screen a network switch needs to be
supplied, not a Network Hub. The vehicle’s
ethernet cable and both PC’s need to be
connected through the network switch.
Refer to router instructions for installation
and set up instructions.
1 — Screen Off Button
2 — PC 2 Button
3 — PC 1 Button
4 — Uconnect Button
5 — AUX 4 Button
2020_DODGE_CHARGER_POLICE_SUP_USA.book Page 48
