Garage Door Opener
Push and hold the two outside HomeLink
®
buttons for 20 seconds until
the orange indicator flashes. An individual channel cannot be erased.
TO ERASE ALL SET CHANNELS:
1
1
While the car is ON, hold the handheld garage door transmitter
1-3 inches from the HomeLink
®
button you want to program in
the vehicle.
2
2
Push and hold both the HomeLink
®
button being programmed
and the button on the garage door transmitter.
LINK YOUR GARAGE DOOR
NEED ASSISTANCE?
1-800-355-3515
Scan For
HomeLink
®
Video
33
For Non-Rolling Code
garage door openers, watch for the indicator
light to go constant.
For Rolling Code
garage door openers, watch for the indicator light
to go from a slow blink to blinking rapidly.
4
4
For Rolling Code
garage door openers only, firmly push and release
the “LEARN” or “TRAIN” button on your garage door opener motor
in your garage, then push the HomeLink
®
button in your vehicle
for two long presses.
5
5
If the programming was successful, your garage door should
open and close with your chosen HomeLink
®
button.
ROLLING OR NON-ROLLING?
Check your garage door opener motor in your garage for a
“LEARN” or “TRAIN” button by the hanging antenna. If you
have one of these, you have a Rolling Code garage door opener.
?
?
