HomeLink
®
GARAGE DOOR OPENER
While the car is ON, hold the handheld garage door transmitter 1-3 inches
from the HomeLink® button to be programmed in the vehicle.
1
Push and hold both the HomeLink®
button being programmed and the button
on the garage door transmitter.
2
Push and hold the two outside HomeLink®
buttons for 20 seconds until the orange
indicator flashes. An individual channel cannot be erased.
TO
ERASE
ALL SET CHANNELS:
LINK Y
OUR G
AR
A
GE DOOR
For Non-Rolling Code
garage door openers, watch for the indicator
light to go constant.
For Rolling Code
garage door openers, watch for the indicator light to
go from a slow blink to blinking rapidly.
3
For Rolling Code
garage door openers only, firmly push and release the
“LEARN” or “TRAIN” button on your garage door opener motor in your garage,
then push the HomeLink® button in your vehicle for two long holds.
4
If the programming was successful, your garage door should
open and close with your chosen HomeLink® button.
5
ROLLING OR NON-ROLLING?
Check your garage door opener motor in your garage for a “LEARN”
or “TRAIN” button by the hanging antenna. If you have one of these,
you have a Rolling Code garage door opener.
?
For more detailed instructions, see “Universal Garage Door Opener
(HomeLink®)” in your Owner’s Manual.
