Dodge CHALLENGER 2020, Руководство пользователя

Страница: 88 / 415

GETTING TO KNOW YOUR INSTRUMENT PANEL 87
NOTE:

The charging system is independent from
load reduction. The charging system
performs a diagnostic on the charging
system continuously.

If the Battery Charge Warning Light is on it
may indicate a problem with the charging
system. Refer to “Battery Charge Warning
Light” in “Getting To Know Your Instrument
Panel” for further information.
The electrical loads that may be switched off (if
equipped), and vehicle functions which can be
affected by load reduction:

Heated Seat/Vented Seats/Heated Wheel

Heated/Cooled Cup Holders — If Equipped

Rear Defroster And Heated Mirrors

HVAC System

115 Volts AC Power Inverter System

Audio and Telematics System
Loss of the battery charge may indicate one or
more of the following conditions:

The charging system cannot deliver enough
electrical power to the vehicle system
because the electrical loads are larger than
the capability of the charging system. The
charging system is still functioning properly.

Turning on all possible vehicle electrical
loads (e.g. HVAC to max settings, exterior and
interior lights, overloaded power outlets
+12 Volts, 115 Volts AC, USB ports) during
certain driving conditions (city driving,
towing, frequent stopping).

Installing options like additional lights,
upfitter electrical accessories, audio
systems, alarms and similar devices.

Unusual driving cycles (short trips separated
by long parking periods).

The vehicle was parked for an extended
period of time (weeks, months).

The battery was recently replaced and was
not charged completely.

The battery was discharged by an electrical
load left on when the vehicle was parked.

The battery was used for an extended period
with the engine not running to supply radio,
lights, chargers, +12 Volts portable appli -
ances like vacuum cleaners, game consoles
and similar devices.
What to do when an electrical load reduction
action message is present (“Battery Saver On”
or “Battery Saver Mode”)
During a trip:

Reduce power to unnecessary loads if
possible:

Turn off redundant lights (interior or
exterior)

Check what may be plugged in to power
o12 Volts, 115 Volts AC, USB
ports

Check HVAC settings (blower, tempera -
ture)

Check the audio settings (volume)
3
20_LA_OM_EN_USC_t.book Page 87