Dodge 2016 Dart Скачать руководство пользователя страница 575

Страница: 575 / 691

2. Turn off the heater, radio, and all unnecessary electri-

cal accessories.

3. If using another vehicle to jump-start the battery, park

the vehicle within the jumper cables reach, set the
parking brake and make sure the ignition is OFF.

WARNING!

Do not allow vehicles to touch each other as this
could establish a ground connection and personal
injury could result.

Jump Starting Procedure

WARNING!

Failure to follow this jump-starting procedure could
result in personal injury or property damage due to
battery explosion.

CAUTION!

Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.

Connecting The Jumper Cables

1. Connect the positive

(+)

end of the jumper cable to the

positive

(+)

post of the discharged vehicle.

2. Connect the opposite end of the positive

(+)

jumper

cable to the positive

(+)

post of the booster battery.

3. Connect the negative

(-)

end of the jumper cable to the

negative

(-)

post of the booster battery.

4. Connect the opposite end of the negative

(-)

jumper

cable to a good engine ground (exposed metal part of
the discharged vehicle’s engine) away from the battery
and the fuel injection system.

WHAT TO DO IN EMERGENCIES

573

Содержание 2016 Dart




















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2016 Dart

Отзывы:

Похожие инструкции для 2016 Dart

Бренды по названию

Популярные бренды

Dodge 2016 Dart, Руководство пользователя

Результаты поиска

Содержание 2016 Dart

Отзывы:

Похожие инструкции для 2016 Dart

Бренды по названию

Популярные бренды