Dodge 2015 Journey Скачать руководство пользователя страница 551

Страница: 551 / 648

Engine Oil Viscosity — 2.4L Engine

MOPAR® SAE 5W-20 engine oil or equivalent Pennzoil®

or Shell Helix® is recommended for all operating tem-

peratures. This engine oil improves low temperature

starting and vehicle fuel economy.
The engine oil filler cap also shows the recommended

engine oil viscosity for your engine. For information on

the engine oil filler cap location, refer to “Engine Com-

partment” in “Maintaining Your Vehicle” for further

information.
Lubricants that do not have both, the engine oil certifi-

cation mark and the correct SAE viscosity grade number

should not be used.

Engine Oil Viscosity — 3.6L Engine

MOPAR® SAE 5W-20 engine oil approved to Chrysler

Material Standard MS-6395 such as Pennzoil®, Shell

Helix® or equivalent is recommended for all operating

temperatures. This engine oil improves low temperature

starting and vehicle fuel economy.
The engine oil filler cap also shows the recommended

engine oil viscosity for your engine. For information on

engine oil filler cap location, refer to the “Engine Com-

partment” illustration in this section.

NOTE:

MOPAR® SAE 5W-30 engine oil approved to

Chrysler Material Standard MS-6395 such as Pennzoil®,

Shell Helix® or equivalent may be used when SAE 5W-20

engine oil meeting MS-6395 is not available.

Synthetic Engine Oils

You may use synthetic engine oils provided the recom-

mended oil quality requirements are met, and the recom-

mended maintenance intervals for oil and filter changes

are followed.

MAINTAINING YOUR VEHICLE 549

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды