Dodge 2015 Journey Скачать руководство пользователя страница 513

Страница: 513 / 648

HAZARD WARNING FLASHERS

The Hazard Warning flasher switch is located in the

instrument panel switch bank, above the climate controls.

Press the switch to turn on the Hazard Warning

flasher. When the switch is activated, all direc-

tional turn signals will flash on and off to warn oncoming

traffic of an emergency. Press the switch a second time to

turn off the Hazard Warning flashers.
This is an emergency warning system and it should not

be used when the vehicle is in motion. Use it when your

vehicle is disabled and it is creating a safety hazard for

other motorists.
When you must leave the vehicle to seek assistance, the

Hazard Warning flashers will continue to operate even

though the ignition is placed in the OFF position.

NOTE:

With extended use the Hazard Warning flashers

may wear down your battery.

IF YOUR ENGINE OVERHEATS

In any of the following situations, you can reduce the

potential for overheating by taking the appropriate ac-

tion.

•

On the highways — slow down.

•

In city traffic — while stopped, place the transmission

in NEUTRAL, but do not increase engine idle speed.

NOTE:

There are steps that you can take to slow down

an impending overheat condition:

•

If your air conditioner (A/C) is on, turn it off. The A/C

system adds heat to the engine cooling system and

turning the A/C off can help remove this heat.

•

You can also turn the temperature control to maximum

heat, the mode control to floor and the blower control

WHAT TO DO IN EMERGENCIES 511

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды