Dodge 2014 GRAND CARAVAN Скачать руководство пользователя страница 572

Страница: 572 / 698

If tire pressure is less than 19 psi (1.3 Bar):

The tire is too badly damaged. Do not attempt to drive
the vehicle further. Call for assistance.

If the tire pressure is 19 psi (1.3 Bar) or higher:

1. Press the Power Button (4) to turn on TIREFIT and

inflate the tire to the pressure indicated on the tire and
loading information label on the driver-side door
opening.

NOTE:

If the tire becomes over-inflated, press the Defla-

tion Button to reduce the tire pressure to the recom-
mended inflation pressure before continuing.

2. Disconnect the TIREFIT kit from the valve stem,

reinstall the cap on the valve stem and unplug from
12 Volt outlet.

3. Place the TIREFIT kit in its proper storage area in the

vehicle.

4. Have the tire inspected and repaired or replaced at the

earliest opportunity at an authorized dealer or tire
service center.

5. Replace the Sealant Bottle (1) and Sealant Hose (6)

assembly at your authorized dealer as soon as pos-
sible. Refer to (F) “Sealant Bottle and Hose Replace-
ment”.

NOTE:

When having the tire serviced, advise the autho-

rized dealer or service center that the tire has been sealed
using the TIREFIT service kit.

(F) Sealant Bottle And Hose Replacement:

1. Uncoil the Sealant Hose (6) (clear in color).

2. Locate the round Sealant Bottle release button in the

recessed area under the sealant bottle.

570

WHAT TO DO IN EMERGENCIES

Содержание 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2014 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2014 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2014 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2014 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2014 GRAND CARAVAN

Бренды по названию

Популярные бренды