Dodge 2013 SRT Viper Скачать руководство пользователя страница 246

Страница: 246 / 346

3. Uncoil the Air Pump Hose (7) (black in color) and

screw the fitting at the end of hose (7) onto the valve
stem.

4. Check the pressure in the tire by reading the Pressure

Gauge (3).

If tire pressure is less than 19 psi (1.3 Bar)

, the tire is too

badly damaged. Do not attempt to drive the vehicle
further. Call for assistance.

If the tire pressure is 19 psi (1.3 Bar) or higher:

1. Press the Power Button (4) to turn on TIREFIT and

inflate the tire to the pressure indicated on the tire and
loading information label on the driver-side door
opening.

NOTE:

If the tire becomes over-inflated, press the Defla-

tion Button to reduce the tire pressure to the recom-
mended inflation pressure before continuing.

2. Disconnect the TIREFIT kit from the valve stem,

reinstall the cap on the valve stem and unplug from 12
Volt outlet.

3. Place the TIREFIT kit in its proper storage area in the

vehicle.

4. Have the tire inspected and repaired or replaced at the

earliest opportunity at an authorized dealer or tire
service center.

5. Replace the Sealant Bottle (1) and Sealant Hose (6)

assembly at your authorized dealer as soon as pos-
sible. Refer to “(F) Sealant Bottle and Hose Replace-
ment.”

NOTE:

When having the tire serviced, advise the autho-

rized dealer or service center that the tire has been sealed
using the TIREFIT service kit.

244

WHAT TO DO IN EMERGENCIES

Содержание 2013 SRT Viper



























































































































































































































































































































































Результаты поиска

Содержание 2013 SRT Viper

Отзывы:

Похожие инструкции для 2013 SRT Viper

Бренды по названию

Популярные бренды

Dodge 2013 SRT Viper, Руководство пользователя

Результаты поиска

Содержание 2013 SRT Viper

Отзывы:

Похожие инструкции для 2013 SRT Viper

Бренды по названию

Популярные бренды