Signal Processing
8
Signal Processing
Assignment
Pedal controls:
3- Auto Wah:
Auto Wah sensitivity.
4- Mod Speed:
Chorus, Flange, Tremolo, Phaser, or Ring Modulator
speed.
5- Mod Depth:
Chorus, Flange, Tremolo, or Phaser depth.
6- Mod Level:
Chorus, Flange, Phaser, or Pixellator level.
7- Detune
Detune amount.
8- Pitch/Detune
Pitch Shift and Detune level.
Level
9- Delay Level:
Mono or Multi Delay level.
10- Reverb Level:
Reverb level.
When programs where Volume, Wah, or Auto Wah are selected in Expression
Assign, the sound will reflect where the current pedal position is,.otherwise the
pedal must be moved in order for the effect to be changed.
Storing Programs
After you have made modifications to a program, you may want to store
the changes. The TEC8 lets you store up to 30 Programs in the User mem-
ory locations.
Remember, you have to store any changes in a User Program memory
location otherwise all your changes will be lost.
To store a Program into a memory location:
1) Press the Store button. The Store LED begins flashing and the
User LED lights (if not lit already).
2) Use the Data wheel to select the User location where you
want to store the Program.
3) Press the Store button again to store the Program in the
location you selected.
Note:
Changes made by the Expression Pedal cannot be stored.
Bypassing
The TEC8's bypass functions are very simple.
To Bypass individual effects:
1) From Program mode, decide which effect you want to bypass
and press its Select button twice. The display reads:
- -
.
User
Store
DATA
User
Store
Signal Processing
